There are many men who are dissatisfied with the size or shape of their penis. In addition, an indefinite erection worries one in three. There is an effective solution for these problems - a vacuum pump. In the article, we will explain how to use a vacuum pump correctly, how to choose it correctly, and what methods are available for penis enlargement.
Is it possible to increase the member with luxury
An erection pump is a device that uses a vacuum to increase blood and lymph flow to the penis.. The device consists of a flask (cylinder) and a pressure regulator. It is called the procedure of "pumping" the memberpump. Similar devices are used by official medicine for LOD-therapy. It helps to stimulate blood and lymph flow and improve erection. With regular exposure, the cavernous bodies stretch and hold more blood, the penis grows, so it is possible to enlarge the penis with a vacuum pump.
The working principle of the vacuum penis enlarger
How the pump works:the penis is placed in a flask, its edges are firmly pressed to the groin area, then negative pressure is created in the container. The penis consists of cavernous bodies, which consist of a large number of cavities. The larger the potential volume filled with blood when excited, the larger the erect penis. Due to the increase in blood and lymph flow, the tissues are stretched in a vacuum and return to their normal state after returning to the normal environment.
An erection pump, by the nature of its action, is a kind of drug analogue:with a single use, it quickly stimulates an erection and improves the functionality of the cavernous bodies with a course..If the pump is carried out regularly, the gradual contraction of the tissues is not completed, but lengthened.. This is the goal of most men who train with luxury.
The degree of extension of the penis is limited by the so-called tunic(this term is often found in the forums of NUPers who are supporters of natural penis growth). It is a protein membrane that covers the cavernous bodies. The tunic is necessary to maintain an erection - it compresses the veins of the penis and prevents blood from flowing out. It is not possible to increase the size of the genital organ without lengthening the tunic fibers. The effectiveness of training depends on its density and the number of layers. These parameters are individual for each man.
Types of pumps, advantages and disadvantages
Due to the nature of the work environment affecting the member,pumps are divided into vacuum and water. In the first case, air is used. Types of vacuum pumps:
- In manual control. As an air blower - a rubber pear or sleeve. Pressure gauge and relief valve are provided for pressure control;
- On autopilot. A negative pressure is automatically generated in the pump;
- it vibrates.
Advantages of vacuum enlargers:
- Improving penis growth and erection by improving blood flow in the penis;
- Cost-effective unlike hydropumps and penis enlargement surgery.
Defects:
- Possible side effects of training: bruising, brown spots. All this is the result of microtrauma and rupture of capillaries due to excessive exposure to the device;
- With improper long-term use, the member may lose sensitivity.
Hydropumps use hot water as their working medium. The more it empties from the flask, the more the penis "pulls".There are 3 types of water pumps:
- Classic. One end of the flask is inserted into a fold that is pressed into the groin and acts as a pump: when pressed, water flows through the valve at the other end;
- Combined. Water can be dried both with the help of corrugated cuts and by pressing a pear with a hole connected to the other end of the flask with a flexible hose;
- With automatic control.
Hydro pumps are considered the most efficient and safe, but their price is several times higher than vacuum pumps..Tissue damage is less likely in warm water, because the critical low pressure is not created, the penis warms up well.
Some enterprising men buy a long-cylinder vacuum pump, pour water into it so that the head of the penis is hidden, but the level does not reach the top (water should not enter the tube). When the air is removed, the vacuum air pump starts working on the water principle.
How to choose a vacuum pump
When choosing a pump, you need to consider not only its working principle, but also its size.The flask should be 5 cm longer than the erect penis (add another 2 cm if there is excess weight) and 1-2 cm wider..If the pump is intended to be used to lengthen the penis, then you can choose a narrow flask, if the work goes around, a wider one.(add 4-6 cm around the sewn member). Since devices are marked with a diameter, the value obtained by measuring the circumference of a member should be divided by the number Pi (3. 14).
Pumps with very wide flasks for penis enlargement are unsuitable for the following reasons:
- The protein shell does not extend well, the cavernous bodies are not fully involved.
- The member will be filled with lymph, the foreskin will be out of size.
- During exercise, the skin of the testicles will be pulled, which causes serious discomfort.
In narrow flasks close to the shaft, the head of the penis is subjected to excessive force, resulting in microtrauma.. Approximate parameters for the selection of pumps are shown in Table 1.
| Circumference of the penis (work to increase volume) | Circumference of the penis (work to increase its length) | Pump diameter in inches (2. 54 cm in one inch) |
|---|---|---|
| 6-8 | 8-10 | 1. 5 |
| 8-10 | 10-12 | 1. 75 |
| 10-12 | 12-14 | 2 |
| 12-14 | 14-16 | 2. 25 |
| 14-16 | 16-18 | 2. 5 |
| 16-18 | 18-20 | 2. 75 |
| 18-20 | 20-22 | 3 |
With borderline penis parameters, it is better to choose a smaller pump size.
The flask should be firm and transparent, and the rubber parts should be flexible.. The device for permanent penis enlargement will be used regularly, so it is important to purchase new components for the pump (pump, manometer, flask, seals).
As for care, after each use, the pump flask is washed with a mild detergent and treated with an antiseptic solution, dried.. Knots and fasteners should be left loose for further drying. Pump veterans recommend periodically lubricating the pump with sewing machine oil.
Prices, best models and where to buy
The widest selection of pumps in online sex shops, a number of models are also available in sex shops. The simplest (hand pump) vacuum pump for penis enlargement will cost more10 dollars. Harvest with rubber pears -From $35. The price of the electric pump startsFrom $50. The products of the American manufacturer are considered to be of the highest quality. The price startsFrom $150.
categoryhydro pumpPreference is given to the products of the British manufacturer. Prices varyFrom $180before500 dollars.
How to make a DIY penis pump
If there are quite cheap options on the market, it is impossible to make a pump with your own hands. But if there is a desire to create such a creation, the following materials will be required:
- Plastic cylinder (glass may crack). You can adapt a baby bottle for this;
- Flexible pipe. Suitable for drips;
- Pear or piston device. As the latter, you can use a large syringe.
The bottom of the bottle is cut. On the other hand, a cut is made on the side where the pipe is fixed with a sealant. The second end of the tube is attached to the nose of the syringe. Homemade pump is ready. You can also make a device from a compressor or bicycle pump.
How to enlarge the penis with the pumping technique
There are two methods of penis enlargement with a pump: packing and classic pumping.Packing (translated from English means "packing") - work on the length of the penis. A narrow flask is used for this. This technique is optimal for curved members, because in wide flasks the bending angle is more pronounced, the length is lost. When the penis is placed in a narrow flask, it should be lubricated.
With a classic pump, attention is paid to increasing the volume of the penis, a wide flask is used. Between sets, you can practice pushing against the spongy body that surrounds the urethra (more on that below).
Technique
You can start classes only after you have first learned the instructions for the pump. It is necessary to prepare a lubricant (not oil-based) in advance, which will act as a sealant when pressing the edges of the flask to the groin.
- Warming up is the first step.. Before placing in the cylinder, the penis should be heated with steam or hot water for 5-10 minutes.
- The second stage - jelq (jelqing) - penis enlargement technique. The procedure is performed on a semi-erect body. The technique is simple: the penis is grasped at the base ("OK-grab" - a ring formed by the thumb and forefinger), then with light pressure the ring moves towards the end for at least 3 seconds, and the second hand immediately takes it over. Before using the pump, the penis can be kneaded using any of the many gelling techniques. 50-100 repetitions are enough.
- The third stage is to place the semi-erect penis in the pump flask. First, you need to apply lubricant to the pubis (do not touch the scrotum) and the base of the ampoule cuff, then it is gently pressed into the skin of the groin (it is better to remove the hairs beforehand - they interfere with the sealing. ). Give the pump a few strokes and check for leaks.
For implementationsponge body pushing exercisesyou need to pull the skin of the penis towards you as much as possible, then push your thumb up to its base and the rest down, practically deep into the scrotum. In this area, there is a notch between the corpora cavernosa through which you can feel the centrally located urethra. Then you need to squeeze the penis strongly (the lower fingers try to touch the upper one and "suffocate") and slowly pull it towards the head. When moving back, the grip is slightly weakened. Repeat 10-15 times.
Advanced pumpers recommend performing the procedure in several short approaches, replacing it with gel. Periodic massage will prevent the accumulation of lymph under the skin of the penis ("donut effect", "lip").In the first 2 months, it is enough to perform 3 sets of 15 minutes each, between them - 1 minute of jelg. Intermediate users move to 20-30 minute sets.
When using the pump for the first time, it is important to feel how the regulator behaves:the pressure is carefully adjusted to a maximum of 3 inches of mercury, and then the sensations are listened to. After 10 minutes, you can increase the pressure by 1-2 units, hold it for 5 minutes, release it into the air and remove the pump. Lubricate the member and "milk" with gel.In the second and third approaches, the working pressure rises by 1 and 2 units, respectively.(only if convenient).The procedure ends with jelkom(50-100 repetitions) and lubricate with organic ointment against caries. The next day, a new session starts from the previous level.
The optimal pumping time is 15 minutes.(regardless of skill level). The tissues of the penis in the breaks are saturated with oxygen, their risk of necrosis is reduced.
According to "veterans", the optimal pressure in the pump is 2-4 HgAnd not just for beginners. Some try to raise the penis until the appropriate sensations appear, but such measures can stop growth. Doctors' opinion: a pressure of more than 5 Hg seriously disrupts blood circulation and can cause irreversible damage to the structure of the penis. Ultimately, the determining factor is personal comfort.
The mode of pump training is designed in such a way that there is time for tissue recovery.There should be 2-3 rest days per week. To get the best result, the pump can be connected by manual methods (squeezing, stretching with an expander, suspension, juli). All these exercises are more effective when performed immediately after pumping.
According to user reviews, with the correct use of the pump, continuous penis growth can be achieved after 3-5 years of regular training. After about the first 10 months, the length will increase by 2-3 cm, but when you stop exercising, the growth will gradually disappear.
Safety rules and contraindications
It's the biggest mistake most men make when using a pumpto hurry. The principle "the more the better" does not work here.You can not exercise more than the regulated time and more intensively than the permitted norms. This will not lead to a quick result, howeverThere will be negative consequences:
- The erection will disappear, recovery will take a long time;
- The penis will have an "outdated" appearance;
- Rupture of blood vessels will cause bleeding from the urethra;
- The skin of the penis will darken, hematomas will appear on it, including internal ones - this is painful and there is a high risk of scarring (which will cause irreversible erectile dysfunction).
If pain or burning occurs during exercise, it is necessary to remove the pump and massage the penis. There should be no worries. The penis should be lubricated before placing it in the pump. You can use nicotine creams.
Contraindications of the pump:
- priapism;
- bleeding tendency;
- Vascular fragility, atherosclerosis;
- Inflammatory infectious processes in the pelvic region;
- Use of pain relievers.
Before you buy a pump, you shouldconsult a doctor. Ideally, it is desirable to be tested for infections,check the condition of the penis and all small pelvic vessels. The questionnaire will help to determinehidden problems in the form of blood clots, neoplasms, strictures. All these pathologies will immediately worsen when using a pump.
Reviews
We collected some feedback from NUPer forums.
- "I started using a vacuum pump - I liked the feeling, but it seems that I overdid it with pressure and time (I did it for 1. 5-2 hours a day). As a result, the erection disappeared. It is restored only after 2 weeks. The device is effective, I urgently need an erection before a dateIt is indispensable for those who need to improve, but it is important not to overdo it.
- "From my three years of pumping experience, I learned the following: 3 sets of 10 minutes are better than 1 and a half hours. The penis grew 2 cm, the erection problem disappeared, and there were no side effects: the color of the penis was normal, and it did not shrink at all.
- "The pumps of the American manufacturer are the best: the pump does not break, the manometer is accurate, the cylinder fits perfectly, there are no unnecessary gaskets, seals and other falling and cracking devices in the installation system. "
- "I bought a discreet British pump. Dislike. Reasons: 1 - the pleat is too hard (you will bruise your pubis when you press it) and 2 - you have to deal with such a luxury in the bath or shower, and it is useless. counter ones.
The result
The pump is primarily an effective means of increasing the stiffness of the erection by training the blood vessels (especially important for middle-aged men). Increasing the length and size of the penis is more of a "side effect", but many work for it. Training takes patience and time, but it really helps to get results.